This article provides general guidance on how to connect your domain to ChoicePro. In addition, there are specific step-by-step instructions available for the most common domain providers such as GoDaddy, GoogleDomainand the CPanel System.
In order to set up your domain, please complete the following steps:
Step 1: Add your domain to ChoicePro Once you are logged in to ChoicePro, navigate to the ‘Domains’ page in the ‘Settings’ tab. Insert your domain by clicking on the yellow ‘+Add domain’ button. After your domain is listed, be sure to save your changes by clicking ‘Save’ on the lower right side. Hereare more details on how to add and manage your domains in ChoicePro.
Step 2: Set up your 301 redirects (If you recently purchased your domain, please go directly to step 3) A 301 redirect is a technique to make sure that your existing website address leads to your new website powered by BookingSuite. Please follow these instructions.
Step 3: Access your domain provider Visit your domain provider’s website and log in to your account. Once you are logged in, find the configuration section for your domains. In case you don’t know your provider, you can look it up via your domain – see article here.
Step 4: Set A record In the configuration section of your domain provider, look for the A record settings and change them to ChoicePro’s IP Address 22.214.171.124 as the destination. In some cases, you will need to select the A record in a tick box or drop-down menu. The ‘@’ symbol is used as a symbol for A record. Be sure you save your changes.
Step 5: Set your CNAME record In the configuration section of your domain provider, look for the CNAME record in your settings. Change the ‘www’ CNAME, so it points to suite-sites.booking.com. Save your changes again.
Step 6: Set your domain as primary Once you have made all changes with your domain provider, go back to the ChoicePro ‘Domains’ page in the ‘Settings’ tab. Set your domain as primary, then publish your website to be sure all changes are saved – see guidance here.
Please note: It can take up to 48 hours for your ChoicePro website to be connected to your domain address. You can test this by typing your domain into your browser.
If you experience problems setting up your domain, you should reach out to your domain provider for support. Here you can find guidance on what information to share when contacting their support team.